1) Small size, light weight, streamlined, fully sealed and easy to carry; 2) High cost performance and high reliability; 3) Built-in overvoltage, overcurrent and short circuit protection; 4) Input characteristics: Voltage: 100-240VAC±10 %; Frequency: 50 60Hz; Current: 1 5A Max; Start-up time: 3sMax; Start-up surge current: 70A 240VAC Max; 5) Output characteristics: Constant voltage constant current mode selection; High precision, low noise; Hold time: 20mS Min; 6) Environment: Working temperature: 0°C-40°C, 5%-90%RH; Storage temperature: -20°C-85°C, 5%-95%RH; 7) Cooling method: natural cooling; 8) Energy efficiency: ERP CEC-VI standard; 9) Safety standards: IEC EN60950-1, IEC EN61558, UL1950, GB4943, EN55022, EN55024, EN55014 10) Compliance with ROHS standards; 11) Pin type: UL PSE VDE K-MARK CCC SAA BS Argentina Russia; desktop input 12) average failure rate: 50,000 hours; warranty for 3 years.

Model : 2008000DEU PS200D8000U

1) Small size, light weight, streamlined, fully sealed and easy to carry;

2). Very cost-effective, high reliability;

3). Built-in overvoltage, overcurrent and short circuit protection;

4). Input characteristics: voltage: 100-240VAC ± 10%; frequency: 50 / 60Hz; current: 1.5A Max;

   Start-up time: 3sMax; start surge current: 70A/240VAC Max;

5). Output characteristics: constant voltage constant current mode selection; high precision, low noise; retention time: 20mS Min;

6). Environment: working temperature: 0 ° C -40 ° C, 5% -90% RH;

   Storage temperature: -20 ° C -85 ° C, 5% -95% RH;

7). Cooling method: natural cooling;

8). Compliance with energy efficiency: ERP/CEC-VI standard;

9). Safety standards: IEC/EN60950-1, IEC/EN61558, UL1950, GB4943, EN55022, EN55024, EN55014.

10). Meet ROHS standards;

11). Pin type: UL/PSE/VDE/K-MARK/CCC/SAA/BS/Argentina/Russia; desktop input

12). Average failure rate: 50,000 hours; warranty for 3 years.

 

 

Input Voltage: 100~240V AC 50~60Hz

Input current: 1.5A Max.

Output Voltage: 5-57V (+-5% tolerance)

Output current: 1.2-20A

Ripple: 1% peak to peak maximum

Over voltage protection & Over current protection & Over Temperature protection & Short circuit protection.

Temperature coefficient: All out+-0.04%°C maximum

Transient response:Maximum excursion of 4% or better on all models.Recovering to 1% of final value within 500uS after a 25% step load change.

Operating temperature: 0 ° C ~ +40 ° C.

Storage temperature: -40 ° C ~ +85 ° C;

Relative humidity: 5% to 95% non-condensing.

Setup up / Hold up / Rise time:Typical: 3000mS / 16mS / 50mS at full load.

Line regulation: +-1% maximum for any input voltage change between input voltage range

Load regulation: +-5%variations from minimum to maximum output current.

Insulation resistance: 50Mohm minimum from output to ground.

Withstand voltage: 4300VDC from input to output

Mean time between failure: 100,000 hours minimum at full load 25°C ambient

Energy Saving (Level VI / Level 6)

EMC requirements: FCC CLASS B, EN55022 CLASS B.EN 55024: 1998+A1: 2001+A2: 2003; Part 15 Subpart B, IC ICES-003

Safety requirements: UL 60950-1: 2007, EN 55022:55024/EN 60950-1/EN 61558-1/EN 61558-2-16, EN 60950-1/EN 61558-1/EN 61558-2-16/AfPS GS 214, AS/NZS 60950-1: 2011 & AS/NZS 3112:2011.

Warranty: 3- Years.